How run KTD 2 on SUPER CARD LITE

Discuss the little known GBA sequel to Telefang here!
Post Reply
Sir Allan Newlight(imported)
Posts: 166
Joined: Wed Dec 24, 2008 7:57 pm

Re: How run KTD 2 on SUPER CARD LITE

Post by Sir Allan Newlight(imported) »

Hi there. I comming back to Tulunk Village since long time. Today I present my slove of SuperCard Lite problem about Playing Keitai Denjuu Telefang 2 <Both versions>

Normally when you do it by Patcher included to Super Card when you turn on the game you have only white screen. All by bad save system which dicted to 128k flash.

Slove of this problem was easy as pie.

~~~~WE NEED~~~~
1. Super Card micro SD <Or Super Card SD> Patcher program.
2. Visual Boy Advance 1.5
3. Rom of KTD2 <Speed or Power>

~~~~~~WHAT WE NEED TO DO~~~~~~
1. Open VBA 1.5 with your KTD2 rom. And set it to flash save type 64k. Reset rom and game should start.
2. Close VBA and look in directory of your KTD2 rom on Sav file.
3. Open SuperCard microSD software and load in there KTD2 rom. Click right mouse buttom when loaded and set properties.
4. In LOAD SAVER FROM FILE we must found our SAV file from VBA 1.5 and check it. <We can add more saver places and even RTS saving>
5. When you do it click OK and come back to menu of Patcher and click OUT.

And done... Put your patched rom to microSD card and later to SuperCard Lite <Or SD>
Game work 100% <Even I test with English rom Patch> And now I starting my journey throught New Denjuu World with my Forest forme Rex.
Post Reply