Guy guys. I'm pretty new here, so I apologize if this has been asked numerous times before.
I wanted to try playing Telefang 1, and heard that there is a translation patch for it. Excited, I searched and found the most recent patch available. I followed the instructions for applying an ips patch to the rom, which the patcher said worked.
For some reason, when I try to play the rom now, after the typical company logos pop up there is a white screen. The title screen wont even show! So far, I could only find problems similar to mine with Pokemon Emerald. The solution was to change the save type to "flash 128kb"... But the same thing happened...
Any ideas?
Blank screen
Re: Blank screen
Hmm, which patch was it? Off the top of my head I know that happens with one of my SGB border patches but those are separate from the translation project
-
- Posts: 4
- Joined: Fri Dec 09, 2011 3:38 pm
Re: Blank screen
I found it on the wikifang site. It's Blaziken257's version 101 patch.
-
- Posts: 470
- Joined: Mon Dec 24, 2007 3:17 am
Re: Blank screen
Did you apply it to the Speed version or the bootleg? So far, the patch only works with a Japanese Power rom... Aside from that I'm out of ideas. :S
-
- Posts: 4
- Joined: Fri Dec 09, 2011 3:38 pm
Re: Blank screen
Well that explains it. I applied it to Speed. Thanks so much for clarifying!
-
- Posts: 983
- Joined: Fri Dec 22, 2006 11:52 am
Re: Blank screen
I guess this is a good example of why the BPS format is a good idea (as opposed to IPS) -- it stores checksum information, so a BPS patch intended for Power wouldn't work if you try to apply it to Speed.